Skip to main content

Break Off the Screw Head — Break Off Screw Heads (if applicable)

Beginner3 hours

Part of project

How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors · Step 5 of 6

Helpful?

In this video

Once the screw is fully driven, its head will be flush with the carpet surface. The next step is to break off the screw head. The carpet depth gauge has a small notch designed specifically for this. Align this notch over the small, visible screw head. Firmly press down on the depth gauge and then wiggle it left and right. The screw will snap off cleanly at its pre-designed score mark, located about a fifth of an inch below the subfloor. This ensures that no part of the screw head is felt or seen through the carpet, leaving a completely smooth and invisible repair. You can then gently brush the carpet fibers over the tiny hole to further conceal it.

9.5K views78
Transcript
Hide

feel it. Now, the next step, if you look at your depth gauge, it has this little notch right here. That's designed to go over the scored screw so it can snap in the right position. And then you're going to wiggle left to right. And the score snaps off. Let me show you on a new screw. It snaps right there where the manufacturer designed it to snap off, leaving the threads to hold the subfloor firmly to the joist. >> >> Go ahead and feel that. There's nothing to feel. It's completely soft. That screw is set beneath the surface of your carpet and your padding so you feel nothing. >> >> Use as many screws as you need to stop those squeaks. This device is patented and manufactured in the United States of America. You keep the device as long as you need cuz you might have more squeaks in the future. Now, this video was only

Auto-generated transcript. May contain errors.