Skip to main content

Pre-Drill Pilot Holes — Drill Pilot Holes

Beginner3 hours

Part of project

How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors · Step 3 of 6

Helpful?

In this video

Before driving any screws, it is essential to pre-drill pilot holes through the floorboard. This prevents the wood from splitting, especially in older or dry timber, and ensures the screw maintains its full clamping force. Drill a pilot hole slightly smaller than the screw's shank at each marked fixing point. The video demonstrates this process, illustrating where the pilot holes should be placed (e.g., in the center of the joist) and then later explicitly explains how pilot holes prevent splitting and maintain effective clamping force. The video also briefly shows a demonstration of what happens when a long screw is driven without prior inspection, serving as a visual warning against improper technique.

72.2K views918