Skip to main content

Mark Stringer Notches — Mark Stringer Lumber

Beginner3 hours

Part of project

How to Measure Deck Stair Stringer Length · Step 6 of 6

Helpful?

In this video

Select a straight 2x12 pressure-treated lumber board for the stringer. Attach stair gauges (e.g., Squid.jig brand) to a carpenter's square. Set one gauge to the calculated typical tread depth (e.g., 11 inches) and the other to the typical step height (e.g., 6 7/8 inches). Align the square with the lumber's edge, ensuring the gauges are snug against the edge, and trace the first step. Carefully slide the square down the board, aligning the tread measurement with the previous riser mark, and trace subsequent steps. Repeat this process for all steps, ensuring consistent markings. Make sure to account for the first step's reduced height (e.g., 5 7/8 inches) and mark it accordingly at the bottom of the stringer.

75.6K views823
Transcript
Hide

we have everything taken into account, let's move on to the materials. For our kosours, like most others, you will need a 2x12 pressure-treated board. To make this process as simple and straightforward as possible, I took these little stair guides, or templates, and attached them to my carpenter's square. I set one at 11 inches and the other at 6 and 7/8, exactly according to the measurements in our calculator. Once the templates are pressed against the wood, I can draw a line on both sides of the square, giving us perfectly even steps along the entire board, which will then be trimmed to the desired size.

Auto-generated transcript. May contain errors.