Skip to main content

Calculate, Layout, and Cut Stringers — Calculate Diagonal Stringer Length

Beginner3 hours

Part of project

How to Measure Deck Stair Stringer Length · Step 5 of 6

Helpful?

In this video

Although not explicitly shown with a framing square in the video, the stringers must be calculated and laid out precisely. Determine the total rise (vertical height) and total run (horizontal distance) for each stair section. Refer to local building codes for permissible rise and run dimensions (typically 7-3/4 inches max rise, 10 inches min run). Divide the total rise by the number of desired steps to find the individual riser height. Divide the total run by the number of treads (number of steps minus one) to find the individual tread depth. Use a framing square with stair gauges to mark the rise and run on the stringer material. After marking, use a circular saw for the main cuts and a jigsaw or reciprocating saw for the tight corners to avoid overcutting. The video highlights that previous stringers were improperly built and had to be recalculated.

220.9K views9.1K