Marking the Stringers — Mark Stringer Lumber
Part of project
How to Measure Deck Stair Stringer Length · Step 6 of 6
In this video
With the framing square's gauges set to the desired rise (7 1/16 inches) and run (10 inches), begin marking the stringer. Place the framing square on the edge of the 2x12 board and trace the outside for each step. For the first step, instead of using the full rise, mark 5 13/16 inches for the bottom surface. This is because 1 1/4 inches will be added on top for the tread, resulting in the desired total height. The top line marked will be the back surface of the stringer. Continue to mark the outline of all subsequent steps along the board.
Marking the Stringers — Mark Stringer Lumber
Part of project
How to Measure Deck Stair Stringer Length · Step 6 of 6
In this video
With the framing square's gauges set to the desired rise (7 1/16 inches) and run (10 inches), begin marking the stringer. Place the framing square on the edge of the 2x12 board and trace the outside for each step. For the first step, instead of using the full rise, mark 5 13/16 inches for the bottom surface. This is because 1 1/4 inches will be added on top for the tread, resulting in the desired total height. The top line marked will be the back surface of the stringer. Continue to mark the outline of all subsequent steps along the board.