Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Apply Caulk

Load a caulk gun with paintable acrylic latex caulk. Cut the tip of the caulk tube at a 45-degree angle to create a small opening. Apply a continuous bead of caulk along the identified gaps, ensuring it fills the entire crevice. Smooth the bead with a damp cloth or your finger to create a neat finish and ensure good contact with both surfaces. Wipe away any excess caulk immediately.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Apply Caulk

Load a caulk gun with paintable acrylic latex caulk. Cut the tip of the caulk tube at a 45-degree angle to create a small opening. Apply a continuous bead of caulk along the identified gaps, ensuring it fills the entire crevice. Smooth the bead with a damp cloth or your finger to create a neat finish and ensure good contact with both surfaces. Wipe away any excess caulk immediately.

← Project

Window Sealing

Step 3 of 6·2 hr left

Inspect for Drafts
30 minutes
Clean the Area
15 minutes
3
Apply Caulk
45 minutes
4
Install Weatherstripping
30 minutes
5
Apply Window Film
30 minutes
6
Check Operation and Re-inspect
15 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.