Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test for leaks and functionality

Turn the water supply back on and check for leaks. If leaks are present, tighten connections or reapply sealant as needed. Test the new fixtures for proper operation.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test for leaks and functionality

Turn the water supply back on and check for leaks. If leaks are present, tighten connections or reapply sealant as needed. Test the new fixtures for proper operation.

Videos for this step

Check for LeaksTest FaucetTest for Leaks and Troubleshoot

← Project

Tub Fixture Replacement: A Step-by-Step DIY Guide

Step 5 of 5·15 min left

Turn Off Water Supply
5 minsBeginner
Remove Old Tub Faucet and Showerhead
30 mins1 itemsIntermediate
Install New Tub Fixtures
15 minsIntermediate
Test for Leaks and Functionality
1 min3 itemsAdvanced
5
Test for leaks and functionality
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.