Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Test for Leaks and Functionality

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Turn the water supply back on slowly, checking carefully for leaks around all connections. If leaks occur, tighten connections or reapply sealant. Test each fixture (hot and cold) to confirm proper operation and water temperature.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test for Leaks and Functionality

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Turn the water supply back on slowly, checking carefully for leaks around all connections. If leaks occur, tighten connections or reapply sealant. Test each fixture (hot and cold) to confirm proper operation and water temperature.

Videos for this step

Test InstallationRestore Water and Check for LeaksTest Faucet Operation

Tools and Materials

← Project

Tub Fixture Replacement: A Step-by-Step DIY Guide

Step 4 of 5·16 min left

Turn Off Water Supply
5 minsBeginner
Remove Old Tub Faucet and Showerhead
30 mins1 itemsIntermediate
Install New Tub Fixtures
15 minsIntermediate
4
Test for Leaks and Functionality
1 min3 itemsAdvanced
5
Test for leaks and functionality
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.