Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Drill Pilot Holes in Tile

Place painter's tape over the marked spots on the tile. This helps prevent the drill bit from skipping. Using a drill equipped with a masonry or tile drill bit, start drilling at a slow speed. Apply steady, even pressure to create pilot holes. Once through the tile, switch to a standard drill bit if needed to slightly enlarge the hole for the anchor.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Drill Pilot Holes in Tile

Place painter's tape over the marked spots on the tile. This helps prevent the drill bit from skipping. Using a drill equipped with a masonry or tile drill bit, start drilling at a slow speed. Apply steady, even pressure to create pilot holes. Once through the tile, switch to a standard drill bit if needed to slightly enlarge the hole for the anchor.

← Project

Towel Bar Installation

Step 2 of 5·35 min left

Mark Hole Locations
5 minutes
2
Drill Pilot Holes in Tile
15 minutes
3
Insert Wall Anchors
5 minutes
4
Attach Mounting Brackets
10 minutes
5
Mount Towel Bar
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.