Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test, Adjust, and Finalize

Slowly turn the water supply back on and check for any leaks around the new fill valve and connections. Flush the toilet several times. Adjust the float height as needed to ensure the correct water level (usually about a half-inch below the overflow tube).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test, Adjust, and Finalize

Slowly turn the water supply back on and check for any leaks around the new fill valve and connections. Flush the toilet several times. Adjust the float height as needed to ensure the correct water level (usually about a half-inch below the overflow tube).

Videos for this step

Turn on Water and TestTest and AdjustFinal Checks and Adjustments

← Project

Toilet Fill Valve Replacement: A Step-by-Step DIY Guide

Step 5 of 5·10 min left

Shut Off Water Supply and Flush Toilet
5 minsBeginner
Disconnect the Water Supply Line
5 mins1 itemsBeginner
Remove the Old Fill Valve
5 minsBeginner
Install the New Fill Valve
5 mins1 itemsBeginner
5
Test, Adjust, and Finalize
10 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.