Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off Water Supply and Flush Toilet

Begin by turning off the water supply to your toilet. Locate the shut-off valve (usually behind the toilet near the floor or wall) and turn it clockwise to stop the water flow. Then, flush the toilet to completely empty the tank. A sponge or towel can help remove any remaining water.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off Water Supply and Flush Toilet

Begin by turning off the water supply to your toilet. Locate the shut-off valve (usually behind the toilet near the floor or wall) and turn it clockwise to stop the water flow. Then, flush the toilet to completely empty the tank. A sponge or towel can help remove any remaining water.

Videos for this step

Shut Off Water and Drain TankDrain the Toilet TankShut Off Water Supply and Drain Toilet

← Project

Toilet Fill Valve Replacement: A Step-by-Step DIY Guide

Step 1 of 5·30 min left

1
Shut Off Water Supply and Flush Toilet
5 minsBeginner
2
Disconnect the Water Supply Line
5 mins1 itemsBeginner
3
Remove the Old Fill Valve
5 minsBeginner
4
Install the New Fill Valve
5 mins1 itemsBeginner
5
Test, Adjust, and Finalize
10 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.