Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Step 5: The Finishing Touches: Fill and Sand

Attention to detail is what separates a DIY project from a professional one. Using a putty knife, press wood filler firmly into all nail holes, screw holes, and any small gaps on your treads, risers, and skirting. Follow the manufacturer's instructions and allow the filler to dry completely. Once dry, give all surfaces a final, light sanding with a fine-grit sandpaper (150-grit to 220-grit) to create a perfectly smooth canvas. Wipe everything down with a tack cloth to remove all dust, ensuring a pristine surface for staining.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Step 5: The Finishing Touches: Fill and Sand

Attention to detail is what separates a DIY project from a professional one. Using a putty knife, press wood filler firmly into all nail holes, screw holes, and any small gaps on your treads, risers, and skirting. Follow the manufacturer's instructions and allow the filler to dry completely. Once dry, give all surfaces a final, light sanding with a fine-grit sandpaper (150-grit to 220-grit) to create a perfectly smooth canvas. Wipe everything down with a tack cloth to remove all dust, ensuring a pristine surface for staining.

Videos for this step

Fill and Sand Wood SurfacesSand Filled and Installed TreadsApply Wood Filler and Sand

← Project

stair tread installation

Step 5 of 6·5 hr left

Step 1: Prepare the Foundation
120 minutes
Step 2: Measure Twice, Cut Once
90 minutes1 items
Step 3: Install Your New Treads
150 minutes
Step 4: Fit Risers and Skirting Boards
120 minutes
5
Step 5: The Finishing Touches: Fill and Sand
60 minutes
6
Step 6: Stain and Seal for Lasting Beauty
240 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.