Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Step 2: Measure Twice, Cut Once

To achieve that seamless, built-in look, every cut needs to be precise. For each step, measure the depth from the back of the tread to the front of the riser. Remember to add your desired nosing overhang, typically between 1 and 1.5 inches, which helps with foot placement and safety. Next, measure the width from one skirting board to the other. Since older homes can have slight variations, measure at both the front and back of the tread and use the larger measurement. Use these exact dimensions to mark your new tread material, ensuring your cuts are perfectly square for a snug, professional fit.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Step 2: Measure Twice, Cut Once

To achieve that seamless, built-in look, every cut needs to be precise. For each step, measure the depth from the back of the tread to the front of the riser. Remember to add your desired nosing overhang, typically between 1 and 1.5 inches, which helps with foot placement and safety. Next, measure the width from one skirting board to the other. Since older homes can have slight variations, measure at both the front and back of the tread and use the larger measurement. Use these exact dimensions to mark your new tread material, ensuring your cuts are perfectly square for a snug, professional fit.

Videos for this step

Measure and Cut New Hardwood PiecesMeasure and Cut TreadsMeasure and Cut First Tread

Tools and Materials

← Project

stair tread installation

Step 2 of 6·11 hr left

Step 1: Prepare the Foundation
120 minutes
2
Step 2: Measure Twice, Cut Once
90 minutes1 items
3
Step 3: Install Your New Treads
150 minutes
4
Step 4: Fit Risers and Skirting Boards
120 minutes
5
Step 5: The Finishing Touches: Fill and Sand
60 minutes
6
Step 6: Stain and Seal for Lasting Beauty
240 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.