Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Add the Finishing Touches

With your tread securely in place, it's time to clean up. Use a damp cloth to immediately wipe away any adhesive that squeezed out from under the edges. If you used putty to fill fastener holes, make sure it's smooth and flush with the tread's surface. Allow the adhesive to cure completely according to the manufacturer's directions for a safe, durable finish.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Add the Finishing Touches

With your tread securely in place, it's time to clean up. Use a damp cloth to immediately wipe away any adhesive that squeezed out from under the edges. If you used putty to fill fastener holes, make sure it's smooth and flush with the tread's surface. Allow the adhesive to cure completely according to the manufacturer's directions for a safe, durable finish.

Videos for this step

Final Inspection and CleanupRepair and Clean UpCaulk and Finish Seams

← Project

Stair Tread Installation

Step 8 of 8·15 min left

Measure for a Perfect Fit
15 minutes
Create a Template for Precision (Optional but Recommended)
30 minutes
Inspect and Prepare Your New Tread
45 minutes1 items
Perform a 'Dry Fit' Test
20 minutes1 items
Apply Your Construction Adhesive
25 minutes
Set Your New Tread in Place
15 minutes1 items
Reinforce for Maximum Stability (Optional but Recommended)
30 minutes
8
Add the Finishing Touches
15 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.