Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 7 · Apply Plumber's Putty or Sealant

If the leak is coming from the drain flange where it meets the sink, or if you've disassembled and reassembled a joint that still weeps, apply a ring of plumber's putty around the underside of the flange before inserting it into the drain hole, or apply a bead of silicone sealant around the joint after reassembly. Clean excess putty or sealant that squeezes out.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Apply Plumber's Putty or Sealant

If the leak is coming from the drain flange where it meets the sink, or if you've disassembled and reassembled a joint that still weeps, apply a ring of plumber's putty around the underside of the flange before inserting it into the drain hole, or apply a bead of silicone sealant around the joint after reassembly. Clean excess putty or sealant that squeezes out.

Tools and Materials

← Project

Sink Repair

Step 7 of 8·25 min left

Locate the Leak Source
15 minutes
Shut Off Water Supply
5 minutes1 items
Tighten Faucet Base Connections
10 minutes2 items
Inspect and Tighten Drain Assembly Connections
15 minutes2 items
Check Water Supply Line Connections
10 minutes1 items
Replace Worn Gaskets or Seals
30 minutes2 items
7
Apply Plumber's Putty or Sealant
15 minutes3 items
8
Reassemble and Test
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.