Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 6 · Replace Worn Gaskets or Seals

If tightening connections did not stop the leak, inspect rubber gaskets and O-rings around the faucet base, drain assembly, and pipe connections. Carefully remove the old gasket or seal, noting its position and orientation. Install a new, appropriately sized gasket or seal. For faucet base leaks, this may involve removing the faucet assembly. For drain leaks, it might mean disassembling parts of the drain pipe.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Replace Worn Gaskets or Seals

If tightening connections did not stop the leak, inspect rubber gaskets and O-rings around the faucet base, drain assembly, and pipe connections. Carefully remove the old gasket or seal, noting its position and orientation. Install a new, appropriately sized gasket or seal. For faucet base leaks, this may involve removing the faucet assembly. For drain leaks, it might mean disassembling parts of the drain pipe.

Tools and Materials

← Project

Sink Repair

Step 6 of 8·55 min left

Locate the Leak Source
15 minutes
Shut Off Water Supply
5 minutes1 items
Tighten Faucet Base Connections
10 minutes2 items
Inspect and Tighten Drain Assembly Connections
15 minutes2 items
Check Water Supply Line Connections
10 minutes1 items
6
Replace Worn Gaskets or Seals
30 minutes2 items
7
Apply Plumber's Putty or Sealant
15 minutes3 items
8
Reassemble and Test
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.