Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Reassemble and Test

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Reinstall the escutcheon plate and handle. Slowly turn the water supply back on and meticulously check all connections for leaks. Tighten fittings as needed and retest if necessary.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Reassemble and Test

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Reinstall the escutcheon plate and handle. Slowly turn the water supply back on and meticulously check all connections for leaks. Tighten fittings as needed and retest if necessary.

Videos for this step

Reassemble and Test the FaucetTest the RepairTest the Repair

Tools and Materials

← Project

Shower Valve Replacement: A Step-by-Step DIY Guide

Step 5 of 5·15 min left

Turn Off the Water Supply
5 minsBeginner
Remove the Shower Handle and Escutcheon
15 mins1 itemsIntermediate
Remove the Old Shower Valve
30 mins1 items
Install the New Shower Valve
30 mins2 items
5
Reassemble and Test
15 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.