Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Remove the Shower Handle and Escutcheon

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully remove the shower handle and the escutcheon plate covering the valve. This may involve unscrewing or gently prying them off. Use a utility knife to carefully cut any caulk or sealant if necessary.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Remove the Shower Handle and Escutcheon

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully remove the shower handle and the escutcheon plate covering the valve. This may involve unscrewing or gently prying them off. Use a utility knife to carefully cut any caulk or sealant if necessary.

Videos for this step

Remove the Escutcheon PlateRemove Trim Sleeve and Escutcheon PlateRemove Old Handles and Escutcheons

Tools and Materials

← Project

Shower Valve Replacement: A Step-by-Step DIY Guide

Step 2 of 5·1.5 hr left

Turn Off the Water Supply
5 minsBeginner
2
Remove the Shower Handle and Escutcheon
15 mins1 itemsIntermediate
3
Remove the Old Shower Valve
30 mins1 items
4
Install the New Shower Valve
30 mins2 items
5
Reassemble and Test
15 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.