Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Thoroughly Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Cap the water supply lines and install a test cap on the drain line. Turn the water supply back on slowly, checking all connections meticulously for leaks. Address any leaks immediately before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Thoroughly Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Cap the water supply lines and install a test cap on the drain line. Turn the water supply back on slowly, checking all connections meticulously for leaks. Address any leaks immediately before proceeding.

Videos for this step

Water TestPressure Test Water LinesTest and Verify

Tools and Materials

← Project

Shower Rough-In Plumbing: A Step-by-Step DIY Guide

Step 4 of 4·almost done

Precisely Mark Shower Plumbing Locations
1 min3 itemsIntermediate
Install the Shower Drain Line
2 mins4 itemsAdvanced
Install the Water Supply Lines
2 mins4 itemsAdvanced
4
Thoroughly Test for Leaks
1 min2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.