Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Install the Water Supply Lines

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Run the hot and cold water supply lines to the marked valve locations. Connect the PEX lines to the supply stubs using appropriate fittings. Securely tighten all connections to prevent leaks. Consider using a torque wrench for consistent tightening.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Install the Water Supply Lines

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Run the hot and cold water supply lines to the marked valve locations. Connect the PEX lines to the supply stubs using appropriate fittings. Securely tighten all connections to prevent leaks. Consider using a torque wrench for consistent tightening.

Videos for this step

Connect water supplyAssemble Faucet and Supply LinesConnect Plumbing Lines

Tools and Materials

← Project

Shower Rough-In Plumbing: A Step-by-Step DIY Guide

Step 3 of 4·3 min left

Precisely Mark Shower Plumbing Locations
1 min3 itemsIntermediate
Install the Shower Drain Line
2 mins4 itemsAdvanced
3
Install the Water Supply Lines
2 mins4 itemsAdvanced
4
Thoroughly Test for Leaks
1 min2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.