Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Install New Shower Hardware

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Apply plumber's tape (Teflon tape) to the threads of the shower arm and new components in a clockwise direction. Screw on the new showerhead and handles by hand, then use an adjustable wrench to further tighten them gently. Avoid over-tightening to prevent damage.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Install New Shower Hardware

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Apply plumber's tape (Teflon tape) to the threads of the shower arm and new components in a clockwise direction. Screw on the new showerhead and handles by hand, then use an adjustable wrench to further tighten them gently. Avoid over-tightening to prevent damage.

Videos for this step

Install the shower armInstall New Rain ShowerheadPrepare and Install New Shower Arm

Tools and Materials

← Project

Shower Hardware Replacement: A Step-by-Step DIY Guide

Step 3 of 4·35 min left

Turn Off the Water Supply
5 minsBeginner
Remove the Old Shower Hardware
10 mins2 itemsIntermediate
3
Install New Shower Hardware
30 mins2 itemsIntermediate
4
Test for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.