Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off the Water Supply

Before you begin, completely shut off the water supply to your shower. Locate the shut-off valves, typically near the shower or on the main water line. Turn the valves clockwise to stop the flow of both hot and cold water. Double-check that the water is off by turning on a nearby faucet.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off the Water Supply

Before you begin, completely shut off the water supply to your shower. Locate the shut-off valves, typically near the shower or on the main water line. Turn the valves clockwise to stop the flow of both hot and cold water. Double-check that the water is off by turning on a nearby faucet.

Videos for this step

Turn off water supplyTurn Off Water SupplyShut Off Water Supply

← Project

Shower Faucet Replacement: A Complete DIY Guide

Step 1 of 4·51 min left

1
Shut Off the Water Supply
5 minsBeginner
2
Remove the Old Shower Hardware
15 mins1 itemsIntermediate
3
Install the New Shower Valve
1 min2 itemsAdvanced
4
Install New Hardware and Test for Leaks
30 minsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.