Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Mix and Apply Concrete Resurfacer

In a clean mixing bucket, combine the concrete resurfacer powder with the recommended amount of clean water. Mix thoroughly with a drill equipped with a mixing paddle until a lump-free, workable consistency is achieved. The mixture should be like thick pancake batter. Immediately after mixing, pour the resurfacer onto the primed step and spread it evenly using a squeegee or trowel. Work from the top step downwards. Ensure consistent thickness across all surfaces.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Mix and Apply Concrete Resurfacer

In a clean mixing bucket, combine the concrete resurfacer powder with the recommended amount of clean water. Mix thoroughly with a drill equipped with a mixing paddle until a lump-free, workable consistency is achieved. The mixture should be like thick pancake batter. Immediately after mixing, pour the resurfacer onto the primed step and spread it evenly using a squeegee or trowel. Work from the top step downwards. Ensure consistent thickness across all surfaces.

Videos for this step

Mix Concrete Resurfacing ProductApply and Texture Concrete ResurfacerApply Thin Layer of Resurfacer

Tools and Materials

← Project

How to Resurface Worn Concrete Steps

Step 4 of 6·25.8 hr left

Inspect and Clean Concrete Steps
60 minutes4 items
Repair Cracks and Damage
120 minutes6 items
Prime the Surface
30 minutes3 items
4
Mix and Apply Concrete Resurfacer
75 minutes7 items
5
Texture and Finish
30 minutes3 items
6
Cure the Resurfacer
1440 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.