Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test for Leaks and Adjust Temperature

Turn the water supply back on slowly. Thoroughly check all connections for leaks. Adjust the temperature setting as needed. If leaks persist, carefully re-examine the installation process, paying close attention to tightened fittings.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test for Leaks and Adjust Temperature

Turn the water supply back on slowly. Thoroughly check all connections for leaks. Adjust the temperature setting as needed. If leaks persist, carefully re-examine the installation process, paying close attention to tightened fittings.

Videos for this step

Turn Water On and Check for LeaksTest for leaks.Testing and Troubleshooting Leaks

← Project

Replace a Delta Shower Faucet with Monitor Series

Step 5 of 5·15 min left

Shut Off the Water Supply: Preventing Leaks
5 minsBeginner
Remove the Old Shower Trim: Accessing the Valve
30 mins1 itemsIntermediate
Remove the Old Delta Valve: Preparing for the New Installation
1 min1 itemsAdvanced
Install the New Delta Monitor Valve and Trim
1 minAdvanced
5
Test for Leaks and Adjust Temperature
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.