Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off the Water Supply: Preventing Leaks

Before you begin, completely shut off the main water supply to your house. This is usually near the water meter. Alternatively, locate the shut-off valves for your shower, often found under the sink or in the basement. Turn the valves clockwise until completely closed. Double-check that the water is off by attempting to turn on the shower faucet.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off the Water Supply: Preventing Leaks

Before you begin, completely shut off the main water supply to your house. This is usually near the water meter. Alternatively, locate the shut-off valves for your shower, often found under the sink or in the basement. Turn the valves clockwise until completely closed. Double-check that the water is off by attempting to turn on the shower faucet.

Videos for this step

Turn Off Water SupplyShut Off Water SupplyShut Off Water Supply and Drain Lines

← Project

Replace a Delta Shower Faucet with Monitor Series

Step 1 of 5·52 min left

1
Shut Off the Water Supply: Preventing Leaks
5 minsBeginner
2
Remove the Old Shower Trim: Accessing the Valve
30 mins1 itemsIntermediate
3
Remove the Old Delta Valve: Preparing for the New Installation
1 min1 itemsAdvanced
4
Install the New Delta Monitor Valve and Trim
1 minAdvanced
5
Test for Leaks and Adjust Temperature
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.