Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Gently Warm and Loosen the Adhesive

Before you begin, take a moment to assess the situation. To loosen the old glue, carefully run a heat gun or a standard hair dryer along the edges of the tread. The key here is to keep the heat moving continuously to warm the adhesive without scorching the wood. Work in small, manageable sections. If a spot is stubborn, simply reapply a little heat. Patience, not force, is the secret to success.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Gently Warm and Loosen the Adhesive

Before you begin, take a moment to assess the situation. To loosen the old glue, carefully run a heat gun or a standard hair dryer along the edges of the tread. The key here is to keep the heat moving continuously to warm the adhesive without scorching the wood. Work in small, manageable sections. If a spot is stubborn, simply reapply a little heat. Patience, not force, is the secret to success.

Videos for this step

Apply Heat and ScrapeRemove Stubborn Adhesive ResidueHeat and Scrape Tile

← Project

Remove Old Stair Treads

Step 1 of 4·2.6 hr left

1
Gently Warm and Loosen the Adhesive
20 minutes
2
Carefully Lift the Old Treads
30 minutes
3
Clear Away Lingering Adhesive Residue
45 minutes
4
Create a Smooth, Clean Surface for Installation
60 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.