Heat and Scrape Tile — Gently Warm and Loosen the Adhesive
Part of project
Remove Old Stair Treads · Step 1 of 4
In this video
Begin the removal process by directing the heat source (either a heat gun or hair dryer) at the edge or corner of a loose vinyl tile. Apply heat for approximately 10-20 seconds to allow the adhesive to warm up and become pliable. As the adhesive softens, carefully insert the edge of a hand scraper or flathead screwdriver underneath the heated tile. Apply gentle upward pressure to lift the tile, working the tool along the adhesive line as you continue to apply heat. The goal is to lift the tile in one piece if possible, minimizing adhesive residue on the subfloor. Repeat this process for each tile that needs to be removed.
Heat and Scrape Tile — Gently Warm and Loosen the Adhesive
Part of project
Remove Old Stair Treads · Step 1 of 4
In this video
Begin the removal process by directing the heat source (either a heat gun or hair dryer) at the edge or corner of a loose vinyl tile. Apply heat for approximately 10-20 seconds to allow the adhesive to warm up and become pliable. As the adhesive softens, carefully insert the edge of a hand scraper or flathead screwdriver underneath the heated tile. Apply gentle upward pressure to lift the tile, working the tool along the adhesive line as you continue to apply heat. The goal is to lift the tile in one piece if possible, minimizing adhesive residue on the subfloor. Repeat this process for each tile that needs to be removed.