Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 4 · Install the Hanging Hardware

For a nail and hook: Hold the hook against the wall at your mark and gently tap the nail through the hook's opening with a hammer until it is secure. For a screw and anchor: Drill a pilot hole if required by the anchor type, insert the anchor, and then drive the screw into the anchor. Ensure the hardware is flush with the wall and does not wiggle.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Install the Hanging Hardware

For a nail and hook: Hold the hook against the wall at your mark and gently tap the nail through the hook's opening with a hammer until it is secure. For a screw and anchor: Drill a pilot hole if required by the anchor type, insert the anchor, and then drive the screw into the anchor. Ensure the hardware is flush with the wall and does not wiggle.

← Project

Picture Hanging

Step 4 of 6·10 min left

Determine Picture Placement
5 minutes
Mark the Hanging Point
3 minutes
Select Appropriate Hanging Hardware
5 minutes
4
Install the Hanging Hardware
5 minutes
5
Hang the Picture
2 minutes
6
Level the Picture
3 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.