Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Mark the Hanging Point

Measure the distance from the top of the picture frame to the hanging point (e.g., wire, D-ring, sawtooth hanger) on the back. Then, measure that same distance down from the top edge of where you want the frame to sit on the wall. Make a light pencil mark at this spot. If using a level, you can also mark the top center of the frame and then use the level to extend a horizontal line.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Mark the Hanging Point

Measure the distance from the top of the picture frame to the hanging point (e.g., wire, D-ring, sawtooth hanger) on the back. Then, measure that same distance down from the top edge of where you want the frame to sit on the wall. Make a light pencil mark at this spot. If using a level, you can also mark the top center of the frame and then use the level to extend a horizontal line.

← Project

Picture Hanging

Step 2 of 6·18 min left

Determine Picture Placement
5 minutes
2
Mark the Hanging Point
3 minutes
3
Select Appropriate Hanging Hardware
5 minutes
4
Install the Hanging Hardware
5 minutes
5
Hang the Picture
2 minutes
6
Level the Picture
3 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.