Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Step 3: Measure the Width (Side to Side)

To measure the width, run your tape measure from side to side along the front edge of the step, keeping it parallel to the riser. If your stairs are between two walls, measure wall-to-wall. If one side is open, measure from the wall to your other boundary. To achieve that polished, intentional design, we recommend leaving a small border of exposed wood. For example, a standard 36-inch wide stair looks fantastic with a 34-inch tread, leaving a 1-inch border on each side.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Step 3: Measure the Width (Side to Side)

To measure the width, run your tape measure from side to side along the front edge of the step, keeping it parallel to the riser. If your stairs are between two walls, measure wall-to-wall. If one side is open, measure from the wall to your other boundary. To achieve that polished, intentional design, we recommend leaving a small border of exposed wood. For example, a standard 36-inch wide stair looks fantastic with a 34-inch tread, leaving a 1-inch border on each side.

Videos for this step

Measure Stair Tread WidthMeasure Treads and Mark LaminateMeasure and Cut Carpet

← Project

measuring your stairs for treads

Step 3 of 4·5 min left

Step 1: Get Your Count and Your Kit
5 minutes
Step 2: Measure the Depth (Front to Back)
2 minutes
3
Step 3: Measure the Width (Side to Side)
2 minutes
4
Step 4: Record and Double-Check Your Numbers
3 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.