Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Step 2: Measure the Depth (Front to Back)

Working one step at a time, measure the depth. Place the end of your tape measure firmly against the riser (the vertical back of the step). Extend it straight across the tread surface and over the rounded front edge, known as the 'nosing.' It's absolutely critical for a perfect fit that your tape measure lies flat against the clean wood surface. Measuring over old carpet remnants or adhesive will give you an incorrect measurement, so be sure the surface is clear.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Step 2: Measure the Depth (Front to Back)

Working one step at a time, measure the depth. Place the end of your tape measure firmly against the riser (the vertical back of the step). Extend it straight across the tread surface and over the rounded front edge, known as the 'nosing.' It's absolutely critical for a perfect fit that your tape measure lies flat against the clean wood surface. Measuring over old carpet remnants or adhesive will give you an incorrect measurement, so be sure the surface is clear.

Videos for this step

Measure Treads and Mark LaminateMeasure and Mark Tread and NosingMeasure and Cut Carpet

← Project

measuring your stairs for treads

Step 2 of 4·7 min left

Step 1: Get Your Count and Your Kit
5 minutes
2
Step 2: Measure the Depth (Front to Back)
2 minutes
3
Step 3: Measure the Width (Side to Side)
2 minutes
4
Step 4: Record and Double-Check Your Numbers
3 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.