Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Prepare Stair Surface for Light Installation

Ensure the surfaces where the lights will be attached are clean, dry, and free of dust, grease, or loose paint. For adhesive mounting, lightly sanding the surface may improve adhesion. If mounting with screws, pre-drill pilot holes to prevent wood from splitting.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Prepare Stair Surface for Light Installation

Ensure the surfaces where the lights will be attached are clean, dry, and free of dust, grease, or loose paint. For adhesive mounting, lightly sanding the surface may improve adhesion. If mounting with screws, pre-drill pilot holes to prevent wood from splitting.

Videos for this step

Prepare the SurfacePrepare the SurfaceClean Mounting Surfaces

Tools and Materials

← Project

How to Light Basement Stairs Without an Electrician

Step 3 of 6·2.5 hr left

Plan Lighting Layout and Power Source
60 minutes4 items
Select Lighting Fixtures and Power Source
90 minutes5 items
3
Prepare Stair Surface for Light Installation
30 minutes4 items
4
Install Lighting Fixtures
60 minutes3 items
5
Connect Wiring and Power Source
45 minutes6 items
6
Test the Lighting System
15 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.