Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Allow Adhesive to Cure

After all carpet treads have been installed and pressed down, allow the adhesive to cure completely. Refer to the adhesive manufacturer's instructions for the recommended curing time. This typically ranges from 24 to 72 hours. During this period, avoid heavy foot traffic on the stairs to ensure the treads are securely bonded and do not shift.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Allow Adhesive to Cure

After all carpet treads have been installed and pressed down, allow the adhesive to cure completely. Refer to the adhesive manufacturer's instructions for the recommended curing time. This typically ranges from 24 to 72 hours. During this period, avoid heavy foot traffic on the stairs to ensure the treads are securely bonded and do not shift.

Videos for this step

Project CompletionFinal Curing and CaulkingInspect and Finish Installation

Tools and Materials

← Project

How to Install Carpet Treads on Stairs with a Deep Nosing Overhang

Step 7 of 7·24 hr left

Measure Existing Tread Depth and Nosing
15 minutes1 items
Cut Carpet Treads to Size
30 minutes3 items
Dry Fit and Trim Carpet Treads
20 minutes2 items
Apply Adhesive to Treads
25 minutes4 items
Install Carpet Treads
30 minutes1 items
Secure Nosing Overhang
15 minutes1 items
7
Allow Adhesive to Cure
1440 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.