Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Mount Light Fixtures

Most battery-powered motion-sensing stair lights come with adhesive backing or small screws. If using adhesive, peel off the protective film and firmly press the light onto the marked position for the recommended time (usually 30 seconds). If using screws, pre-drill small pilot holes and then secure the fixture with the provided screws.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Mount Light Fixtures

Most battery-powered motion-sensing stair lights come with adhesive backing or small screws. If using adhesive, peel off the protective film and firmly press the light onto the marked position for the recommended time (usually 30 seconds). If using screws, pre-drill small pilot holes and then secure the fixture with the provided screws.

Videos for this step

Mount Motion-Activated LightsPhysical InstallationInstall Second Lighting Fixtures and Test

Tools and Materials

← Project

How to Install Battery-Powered Motion Stair Lights Without Wiring

Step 3 of 5·20 min left

Determine Light Placement
15 minutes1 items
Clean Mounting Surfaces
10 minutes3 items
3
Mount Light Fixtures
5 minutes5 items
4
Install Batteries
5 minutes1 items
5
Test Functionality
10 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.