Skip to main content

Mount Motion-Activated Lights — Mount Light Fixtures

Beginner2 hours

Part of project

How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 3 of 5

Helpful?

In this video

Once the magnetic strips are firmly attached to the brackets, simply slide each motion-activated light onto the magnetic strip. The magnets will hold the lights securely in place. Ensure the light is properly aligned and stable. With this step, the installation is complete. The lights will now be ready to function, illuminating the steps when motion is detected, particularly useful in low-light conditions.

685 views32
Transcript
Hide

to hold the magnet to the bracket you might want to press down with some pressure to make sure the adhesive seals really good to the bracket just slide the light onto the magnet and that's it you're done it takes less than 10 minutes when it gets dark later I'll show you what they look like so for under 30 bucks you can give yourself and your family a little piece of Mind of going up and down the steps in the dark I will leave a link in the

Auto-generated transcript. May contain errors.