Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Drill Pilot Holes

Select a drill bit that is slightly smaller in diameter than the screws you will be using. At each marked screw hole location, drill a pilot hole straight into the wall and into the center of the stud. These pilot holes will make it easier to drive the screws and prevent the wood stud from splitting. Ensure the pilot holes are deep enough to accommodate the full length of the screws.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Drill Pilot Holes

Select a drill bit that is slightly smaller in diameter than the screws you will be using. At each marked screw hole location, drill a pilot hole straight into the wall and into the center of the stud. These pilot holes will make it easier to drive the screws and prevent the wood stud from splitting. Ensure the pilot holes are deep enough to accommodate the full length of the screws.

Videos for this step

Drill Pilot HolesDrill Pilot HolesDrill Pilot Holes

Tools and Materials

← Project

How to Install a Wall-Mounted Handrail on Stairs

Step 4 of 7·1.3 hr left

Determine Handrail Height and Placement
30 minutes4 items
Locate Wall Studs
15 minutes2 items
Mark Bracket Positions on Studs
20 minutes3 items
4
Drill Pilot Holes
15 minutes3 items
5
Mount Handrail Brackets
25 minutes3 items
6
Attach Handrail to Brackets
30 minutes3 items
7
Test Handrail Stability
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.