
How to Install a Wall-Mounted Handrail on Stairs
About This Project
This project outlines the steps for safely installing a wall-mounted handrail on a staircase to improve accessibility and safety.
Tools & Materials
Measuring Tape

Level

Pencil

DEWALT 1-1/2 in. Stud Finder DW0150

Everbilt Matte Black Handrail Bracket 20880

Drill
Measuring Tape
For accurate measurements of plywood and components, ensuring proper assembly.

Level
Ensures surfaces are just right.

Pencil
Marks and draws with ease.

DEWALT 1-1/2 in. Stud Finder DW0150
This Center Sensor Stud Finder has a detection depth of 1-1/2 in. for wood and metal. Traditional stud sensors locate the edge of the stud, but our new product locates the center for a more efficient read, even when held at an angle. Plus, it is constantly calibrating to save time during use. An audible alert and directional LED arrows clearly notify you once the stud is located and you can easily mark the center of the stud with the center marking channel.

Everbilt Matte Black Handrail Bracket 20880
The Everbilt Handrail Bracket is ideal for supporting handrails at any angle. Use in hallways or stairwells. Great for indoor or outdoor use. Easy to install.

Drill
A power tool used for drilling holes in various materials.
Steps
Determine Handrail Height and Placement
30 minutesUsing a tape measure, determine the optimal height for the handrail. The general rule is 34 to 38 inches from the nosing of each stair tread. Mark this height on the wall at regular intervals, ensuring the marks are level. The handrail should extend horizontally at least 12 inches past the top and bottom of the staircase for safety. Consider the users of the staircase; adjust height if necessary for children or individuals with specific needs. Ensure the chosen height allows for comfortable gripping.
Watch: Plan Placement and Mark Handrail HeightLocate Wall Studs
15 minutesAt each marked height, use a stud finder to scan the wall to locate the center of the wall studs. These studs will provide the necessary structural support for the handrail. Mark the center of each stud clearly. It is crucial to anchor the handrail brackets directly into studs for maximum stability and safety. If studs are not conveniently located, consider alternative mounting methods such as using heavy-duty toggle bolts or mounting to blocking between studs, but direct stud mounting is always preferred.
Watch: Find Stud LocationsMark Bracket Positions on Studs
20 minutesHold a handrail bracket against the wall at one of the marked stud locations and at the predetermined handrail height. Ensure the bracket is level. Mark the center of each screw hole onto the wall. Repeat this process for all bracket locations, ensuring they align with the stud centers and maintain a consistent height. If using a continuous handrail, ensure the brackets are spaced appropriately to support the rail effectively, typically every 24 to 36 inches, depending on the handrail material and span.
Watch: Locate and Mark Studs for BracketsDrill Pilot Holes
15 minutesSelect a drill bit that is slightly smaller in diameter than the screws you will be using. At each marked screw hole location, drill a pilot hole straight into the wall and into the center of the stud. These pilot holes will make it easier to drive the screws and prevent the wood stud from splitting. Ensure the pilot holes are deep enough to accommodate the full length of the screws.
Watch: Drill Pilot HolesMount Handrail Brackets
25 minutesAlign each bracket with its corresponding pilot holes. Drive the screws through the bracket's mounting holes and into the pilot holes in the wall studs. Use a drill or a screwdriver to tighten the screws firmly. Ensure each bracket is snug against the wall and does not move. Repeat for all bracket locations. It's important to use screws that are long enough to penetrate well into the studs.
Watch: Mounting the Bracket to the WallAttach Handrail to Brackets
30 minutesPlace the handrail onto the installed brackets. Align the handrail so it sits centered on each bracket. Most handrail systems have pre-drilled holes or specific attachment points on the underside of the rail and the top of the bracket. Use the screws or other hardware provided with your handrail kit to fasten the handrail to each bracket. Ensure the handrail is securely attached and does not shift or wobble. If your handrail requires connecting multiple sections, do this now, ensuring a smooth transition between pieces.
Watch: Attach Handrail to BracketsTest Handrail Stability
5 minutesOnce the handrail is fully installed, test its stability. Grasp the handrail firmly and apply moderate to firm pressure in various directions – up, down, and sideways. Wiggle the rail to check for any looseness or movement at the brackets or where the rail connects to the brackets. The handrail should feel solid and unwavering. If any part feels loose, re-tighten the screws or fasteners. This final check is critical for ensuring safety.
Watch: Perform Handrail Strength Test








