Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Slowly restore the water supply and carefully check all connections for leaks. If any leaks are found, turn off the water immediately and tighten the fittings. Retest before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Slowly restore the water supply and carefully check all connections for leaks. If any leaks are found, turn off the water immediately and tighten the fittings. Retest before proceeding.

Videos for this step

Test for LeaksTest for LeaksTurn on water and check for leaks

← Project

Install a Shower Valve at the Correct Height: A Step-by-Step DIY Guide

Step 5 of 6·1 hr left

Turn Off the Water Supply and Drain Pipes
15 minsBeginner
Access the Shower Plumbing Area
1 min1 itemsIntermediate
Install the Shower Valve Blocking
30 mins3 itemsIntermediate
Solder Copper Pipes (or Connect PEX)
1 min2 items
5
Test for Leaks
30 minsIntermediate
6
Install Shower Trim Kit
30 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.