Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Access the Shower Plumbing Area

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully cut an access panel in the wall to expose the shower plumbing. Use a stud finder to avoid damaging the wall framing. Locate the hot and cold water supply lines.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Access the Shower Plumbing Area

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully cut an access panel in the wall to expose the shower plumbing. Use a stud finder to avoid damaging the wall framing. Locate the hot and cold water supply lines.

Videos for this step

Create an Access PanelCut Drywall Access PanelLocate Studs and Outline Access Hole

Tools and Materials

← Project

Install a Shower Valve at the Correct Height: A Step-by-Step DIY Guide

Step 2 of 6·1.5 hr left

Turn Off the Water Supply and Drain Pipes
15 minsBeginner
2
Access the Shower Plumbing Area
1 min1 itemsIntermediate
3
Install the Shower Valve Blocking
30 mins3 itemsIntermediate
4
Solder Copper Pipes (or Connect PEX)
1 min2 items
5
Test for Leaks
30 minsIntermediate
6
Install Shower Trim Kit
30 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.