Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Clean or Replace Ice Maker Components

If the ice maker has mineral deposits or is dirty, clean the mold and surrounding areas with a mild detergent and water, then rinse thoroughly. If the water inlet valve, motor, thermostat, or other components were found to be faulty in previous steps, replace them with new parts that are compatible with your refrigerator model. Ensure all connections are secure after replacement.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Clean or Replace Ice Maker Components

If the ice maker has mineral deposits or is dirty, clean the mold and surrounding areas with a mild detergent and water, then rinse thoroughly. If the water inlet valve, motor, thermostat, or other components were found to be faulty in previous steps, replace them with new parts that are compatible with your refrigerator model. Ensure all connections are secure after replacement.

Videos for this step

Inspect and Clean Ice Maker TrayClean Water InletCheck Drain Cap and Cleaning Status

Tools and Materials

← Project

Ice Maker Repair

Step 6 of 7·45 min left

Disconnect Power and Water
10 minutes3 items
Access the Ice Maker Assembly
15 minutes3 items
Inspect for Obvious Issues
10 minutes1 items
Check Water Inlet Valve and Line
20 minutes4 items
Test the Ice Maker Motor and Thermostat
25 minutes2 items
6
Clean or Replace Ice Maker Components
30 minutes4 items
7
Reassemble and Test
15 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.