Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Disconnect Power and Water

Before beginning any work, locate the circuit breaker that controls the ice maker and turn it off. Then, turn off the water supply valve connected to the ice maker. This is typically found behind the refrigerator or under the sink. Open a faucet nearby to relieve any pressure in the water line.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Disconnect Power and Water

Before beginning any work, locate the circuit breaker that controls the ice maker and turn it off. Then, turn off the water supply valve connected to the ice maker. This is typically found behind the refrigerator or under the sink. Open a faucet nearby to relieve any pressure in the water line.

Videos for this step

Safety First: Disconnect Power and WaterPrioritize Safety: Disconnect Power and WaterSafety Precautions and Power Disconnection

Tools and Materials

← Project

Ice Maker Repair

Step 1 of 7·2.1 hr left

1
Disconnect Power and Water
10 minutes3 items
2
Access the Ice Maker Assembly
15 minutes3 items
3
Inspect for Obvious Issues
10 minutes1 items
4
Check Water Inlet Valve and Line
20 minutes4 items
5
Test the Ice Maker Motor and Thermostat
25 minutes2 items
6
Clean or Replace Ice Maker Components
30 minutes4 items
7
Reassemble and Test
15 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.