Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Work Through the Clog

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

As the auger cutter head encounters the clog, you will feel the cable tense up and the motor may strain. This is normal. To effectively clear the blockage, use a back-and-forth motion. Advance the cable a few inches into the clog, then retract it slightly, allowing the cutter to break up the material. Repeat this process. Listen for changes in the motor's sound and feel for a reduction in resistance, which indicates you are breaking through. Once you feel the cutter pass through the main obstruction, continue to feed the cable another 10-15 feet down the line to ensure the pipe is fully cleared of any residual debris. If you pull the head back and it is covered in tree roots, you've found the common culprit.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Work Through the Clog

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

As the auger cutter head encounters the clog, you will feel the cable tense up and the motor may strain. This is normal. To effectively clear the blockage, use a back-and-forth motion. Advance the cable a few inches into the clog, then retract it slightly, allowing the cutter to break up the material. Repeat this process. Listen for changes in the motor's sound and feel for a reduction in resistance, which indicates you are breaking through. Once you feel the cutter pass through the main obstruction, continue to feed the cable another 10-15 feet down the line to ensure the pipe is fully cleared of any residual debris. If you pull the head back and it is covered in tree roots, you've found the common culprit.

Videos for this step

Extract the ClogInsert the Auger into the DrainBreak Up or Retrieve the Clog

Tools and Materials

← Project

How to Use a Main Line Cleanout to Clear a Major Sewer Clog

Step 6 of 8·1.2 hr left

Preparation and Safety
20 mins7 itemsIntermediate
Locate and Prepare the Cleanout
15 mins5 itemsBeginner
Open the Cleanout Plug
15 mins5 items
Insert the Auger Cable
10 mins5 itemsIntermediate
Operate the Motorized Auger
30 mins3 items
6
Work Through the Clog
30 mins4 items
7
Retrieve Cable and Test Drain
20 mins6 itemsAdvanced
8
Close Cleanout and Clean Up
20 mins5 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.