Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Check the Pilot Light

Locate the pilot light access cover at the base of the water heater. This is often a small metal plate or a defined opening. You may need to get low to the ground. Use a flashlight to peer through the sight glass or opening into the burner chamber. You are looking for a small, steady, blue flame. If there is no flame, the pilot light is out, which is the direct cause of having no hot water.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Check the Pilot Light

Locate the pilot light access cover at the base of the water heater. This is often a small metal plate or a defined opening. You may need to get low to the ground. Use a flashlight to peer through the sight glass or opening into the burner chamber. You are looking for a small, steady, blue flame. If there is no flame, the pilot light is out, which is the direct cause of having no hot water.

Videos for this step

Identify the Pilot Light IssueMove Control Knob to PilotCheck for Spark at Pilot Assembly

Tools and Materials

← Project

How to Troubleshoot a Gas Water Heater That's Not Working

Step 2 of 6·1.3 hr left

Safety First: Check for Gas Leaks
2 mins2 itemsBeginner
2
Check the Pilot Light
5 mins1 itemsBeginner
3
Relight the Pilot Light
10 mins2 itemsIntermediate
4
Inspect and Clean the Thermocouple
20 mins3 itemsAdvanced
5
Replace the Thermocouple
30 mins2 items
6
Call a Professional Plumber
15 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.