Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Safety First: Check for Gas Leaks

Before beginning any work or inspection, the most critical first step is to check for a gas leak. Approach the water heater and carefully smell the air around the unit, especially near the bottom where the gas line connects. Natural gas is odorized with a substance called mercaptan, which gives it a distinct 'rotten egg' or sulfur smell. If you detect this odor, do not proceed. Immediately evacuate the house, do not use any phones or light switches inside, and call your gas utility company's emergency number from a neighbor's house or your cell phone outside.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Safety First: Check for Gas Leaks

Before beginning any work or inspection, the most critical first step is to check for a gas leak. Approach the water heater and carefully smell the air around the unit, especially near the bottom where the gas line connects. Natural gas is odorized with a substance called mercaptan, which gives it a distinct 'rotten egg' or sulfur smell. If you detect this odor, do not proceed. Immediately evacuate the house, do not use any phones or light switches inside, and call your gas utility company's emergency number from a neighbor's house or your cell phone outside.

Videos for this step

Connect LinesTurn Off Gas and WaitDifferentiate the Odor

Tools and Materials

← Project

How to Troubleshoot a Gas Water Heater That's Not Working

Step 1 of 6·1.4 hr left

1
Safety First: Check for Gas Leaks
2 mins2 itemsBeginner
2
Check the Pilot Light
5 mins1 itemsBeginner
3
Relight the Pilot Light
10 mins2 itemsIntermediate
4
Inspect and Clean the Thermocouple
20 mins3 itemsAdvanced
5
Replace the Thermocouple
30 mins2 items
6
Call a Professional Plumber
15 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.