Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Remove Retaining Clip

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Look at the top of the brass faucet valve body. You will see a small, U-shaped metal clip inserted into two slots, holding the cartridge in place. Using needle-nose pliers or the tip of a flathead screwdriver, firmly pull this clip straight up and out of the faucet body. Be careful not to bend or damage it, as you will need to reuse it.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Remove Retaining Clip

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Look at the top of the brass faucet valve body. You will see a small, U-shaped metal clip inserted into two slots, holding the cartridge in place. Using needle-nose pliers or the tip of a flathead screwdriver, firmly pull this clip straight up and out of the faucet body. Be careful not to bend or damage it, as you will need to reuse it.

Videos for this step

Remove Retaining ClipRemove the Retaining ClipPreparation and Retaining Clip Removal

Tools and Materials

← Project

How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge

Step 6 of 11·24 min left

Gather Tools and New Cartridge
5 mins6 itemsBeginner
Shut Off Water Supply
5 mins1 itemsBeginner
Plug Sink Drain
1 min1 itemsBeginner
Remove Faucet Handle
5 mins3 itemsIntermediate
Remove Dome Cap
3 mins1 itemsIntermediate
6
Remove Retaining Clip
3 mins2 itemsIntermediate
7
Remove Old Cartridge
5 mins2 itemsAdvanced
8
Clean Faucet Body
3 mins1 itemsBeginner
9
Install New Cartridge
5 mins2 itemsIntermediate
10
Reassemble Faucet
5 mins5 itemsIntermediate
11
Turn Water On and Test
3 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.