Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 11 · Turn Water On and Test

With the faucet fully reassembled and the handle in the 'off' position, slowly turn the hot and cold water shut-off valves under the sink counter-clockwise to restore the water supply. Open them fully. Now, check for leaks around the base of the faucet handle and from the spout. Turn the faucet handle on, moving it from hot to cold to test its function and flush out any air in the lines. If there are no drips from the spout when it's off and no leaks around the handle, the repair is complete.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 11 · Turn Water On and Test

With the faucet fully reassembled and the handle in the 'off' position, slowly turn the hot and cold water shut-off valves under the sink counter-clockwise to restore the water supply. Open them fully. Now, check for leaks around the base of the faucet handle and from the spout. Turn the faucet handle on, moving it from hot to cold to test its function and flush out any air in the lines. If there are no drips from the spout when it's off and no leaks around the handle, the repair is complete.

Videos for this step

Test for LeaksTest for Leaks and Proper OperationTest the Repair

Tools and Materials

← Project

How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge

Step 11 of 11·3 min left

Gather Tools and New Cartridge
5 mins6 itemsBeginner
Shut Off Water Supply
5 mins1 itemsBeginner
Plug Sink Drain
1 min1 itemsBeginner
Remove Faucet Handle
5 mins3 itemsIntermediate
Remove Dome Cap
3 mins1 itemsIntermediate
Remove Retaining Clip
3 mins2 itemsIntermediate
Remove Old Cartridge
5 mins2 itemsAdvanced
Clean Faucet Body
3 mins1 itemsBeginner
Install New Cartridge
5 mins2 itemsIntermediate
Reassemble Faucet
5 mins5 itemsIntermediate
11
Turn Water On and Test
3 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.