Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test for Leaks and Restore Water Supply

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Slowly restore the main water supply. Carefully check all connections for leaks by turning on the spigot. If any leaks are present, tighten the connections and retest.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test for Leaks and Restore Water Supply

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Slowly restore the main water supply. Carefully check all connections for leaks by turning on the spigot. If any leaks are present, tighten the connections and retest.

Videos for this step

Test for LeaksTurn on WaterTest Connections

Tools and Materials

← Project

How to Replace an Outdoor Spigot Faucet: A Step-by-Step Guide

Step 6 of 6·20 min left

Turn Off the Outdoor Spigot's Water Supply
5 mins1 itemsBeginner
Drain Remaining Water from the Line
5 mins1 itemsBeginner
Disconnect the Spigot's Supply Line
10 mins1 itemsIntermediate
Remove the Mounting Nuts and Old Spigot
15 mins1 itemsIntermediate
Install the New Outdoor Spigot
5 mins1 itemsBeginner
6
Test for Leaks and Restore Water Supply
20 mins2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.