Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Remove the Mounting Nuts and Old Spigot

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Remove the mounting nuts securing the spigot to the wall or siding. These are usually located inside, behind the wall. Once the nuts are removed, carefully extract the old spigot. Thoroughly clean the area around the pipe opening before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Remove the Mounting Nuts and Old Spigot

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Remove the mounting nuts securing the spigot to the wall or siding. These are usually located inside, behind the wall. Once the nuts are removed, carefully extract the old spigot. Thoroughly clean the area around the pipe opening before proceeding.

Videos for this step

Remove Old Hose Bib and NippleClean the Pipe Opening

Tools and Materials

← Project

How to Replace an Outdoor Spigot Faucet: A Step-by-Step Guide

Step 4 of 6·40 min left

Turn Off the Outdoor Spigot's Water Supply
5 mins1 itemsBeginner
Drain Remaining Water from the Line
5 mins1 itemsBeginner
Disconnect the Spigot's Supply Line
10 mins1 itemsIntermediate
4
Remove the Mounting Nuts and Old Spigot
15 mins1 itemsIntermediate
5
Install the New Outdoor Spigot
5 mins1 itemsBeginner
6
Test for Leaks and Restore Water Supply
20 mins2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.