Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Seal and Test for Leaks

To create a final waterproof barrier, apply a thin, neat bead of plumber's putty or tub & tile silicone caulk around the base of the spout where it meets the wall. This prevents water from splashing behind the spout and into the wall cavity. Once sealed, turn on the water and observe the spout. Check for leaks around the base. Pull the diverter to send water to the showerhead. Check that the diverter works correctly and that water is not leaking excessively from the spout. A small drip from the spout while the shower is on can be normal, but a steady stream indicates a faulty diverter inside the new spout.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Seal and Test for Leaks

To create a final waterproof barrier, apply a thin, neat bead of plumber's putty or tub & tile silicone caulk around the base of the spout where it meets the wall. This prevents water from splashing behind the spout and into the wall cavity. Once sealed, turn on the water and observe the spout. Check for leaks around the base. Pull the diverter to send water to the showerhead. Check that the diverter works correctly and that water is not leaking excessively from the spout. A small drip from the spout while the shower is on can be normal, but a steady stream indicates a faulty diverter inside the new spout.

Videos for this step

Install the New SpoutSeal and Install New SpoutInstall Tub Spout

Tools and Materials

← Project

How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)

Step 6 of 6·5 min left

Prepare the Work Area
5 mins1 itemsBeginner
Identify the Spout Type
5 minsIntermediate
Remove the Old Spout
5 mins3 itemsAdvanced
Clean and Prepare the Pipe
5 mins2 itemsBeginner
Install the New Spout
5 mins4 itemsIntermediate
6
Seal and Test for Leaks
5 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.