Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Create Drywall Access Panel (If Needed)

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If your leak test fails and the leak persists, the issue may be with the connection of the pipe to the drain assembly itself, not just the gasket. Since you do not have an access panel, you will need to create one in the drywall on the wall behind the tub's plumbing. Use a stud finder to locate the studs on either side of the plumbing. Use a level and pencil to draw a rectangular access panel (e.g., 12x12 inches). Carefully cut along the lines using a drywall saw or utility knife. This will give you the necessary access to inspect, tighten, or repair the plumbing connections.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Create Drywall Access Panel (If Needed)

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If your leak test fails and the leak persists, the issue may be with the connection of the pipe to the drain assembly itself, not just the gasket. Since you do not have an access panel, you will need to create one in the drywall on the wall behind the tub's plumbing. Use a stud finder to locate the studs on either side of the plumbing. Use a level and pencil to draw a rectangular access panel (e.g., 12x12 inches). Carefully cut along the lines using a drywall saw or utility knife. This will give you the necessary access to inspect, tighten, or repair the plumbing connections.

Videos for this step

Cap and Test the SystemInstall Stopper and Test for LeaksTest System for Leaks (Pre-Drywall)

Tools and Materials

← Project

How to Replace a Bathtub Overflow Drain Gasket

Step 8 of 9·31 min left

Gather Tools and Prepare Workspace
10 mins3 itemsBeginner
Remove the Overflow Cover Plate
5 mins1 itemsBeginner
Extract the Old Gasket
5 mins3 itemsIntermediate
Clean Mounting Surfaces
5 mins3 itemsBeginner
Install the New Gasket
5 mins1 itemsIntermediate
Reinstall the Cover Plate
5 mins3 itemsBeginner
Test for Leaks
10 mins2 itemsBeginner
8
Create Drywall Access Panel (If Needed)
30 mins7 itemsAdvanced
9
Repair Drywall Access Panel
1 min9 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.